Citizen cls521

24 декабря, 2019 от lionia Выкл

Why do I have to complete a CAPTCHA? Completing the CAPTCHA proves you are a human and gives you temporary access to the web property. What can I do to prevent this in the future? If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware. If you are at an office or shared network, you can ask the network administrator to run citizen cls521 scan across the network looking for misconfigured or infected devices. Another way to prevent getting this page in the future is to use Privacy Pass. You may need to download version 2. 0 now from the Firefox Add-ons Store.

Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn’t end up there. Enter your email and check your inbox. Please also check your spam folder. Check your email for further instructions.

Model CL-S521 that offers high performance printing at 6 inches per second on 4. 1 inch media at very low cost. This printer can be used for high-speed high-quality printing thanks to its thermal-transfer system that uses a line thermal printhead together with its 32 bit RISC CPU and its ‘history control IC’. An industry standard RS232 serial port and USB1. 1 port are standard equipment, for quick data transfer and printing. Its auto-cutter and peeler unit are constructed so they can be replaced easily. The adjustable sensors that permit the adjustment of the positions of the media gap or the black mark detection sensor in the media width direction are standard equipment that can detect the position of special media.

This device is not intended for use at a video workstation in compliance with Bildscharb V. This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. The model name printed on the CL-S521 rating label is JM30-M01.

This Class A digital apparatus complies with Canadian ICES-003. This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Use shielded cables to connect this device to computers. Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Cet équipment produit et utilise l’énergie à radiofréquences et s’iln’est pas installé et utilisé correctment, c’esst à dire en accord strict avec les instructions du fabricant, il risque de provoquer des intérferences avec la réception de la radio et de latélévision. Le présent appareil numérique n’émet pas de bruite radio électriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. Cet équipment est conçu pour fournir une protection satisfaisante contre de telles interférences dans une installation résidentielle. Installer l’ordinateur autre part, par égard pour le récepteur. Brancher l’ordinateur dans une prise de courant différente de façon à ce que l’ordinateur et le récepteur soient branchés sur des circuits différents.

Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water. Do not place this product on an unstable cart, stand or table.

The product may fall, causing serious damage to the product. Slots and openings on the cabinet and the back or bottom are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. This plug will only fit into a grounding-type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Do not allow anything to rest on the power cord.

Do not locate this product where the cord will be walked on. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes for 120V outlet and 7. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. Except as explained elsewhere in this manual, don’t attempt to service this product yourself.

Opening and removing those covers that are marked «Do Not Remove» may expose you to dangerous voltage points or other risks. Refer all servicing on those compartments to service personnel. The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket outlet is installed near the equipment and shall be easily accessible. When the power cord or plug is damaged or frayed. If liquid has been spilled into the product.

If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance, indicating a need for service. Before use, be sure to read this manual.

And keep it handy for reference when needed. The contents of this manual may change without prior notice. Reproduction, transfer, or transmission of the contents of this manual without prior consent is strictly prohibited. We are not liable for any problems resulting from the use of optional products and consumable supplies other than the designated products contained herein. Do not handle, disassemble or repair the parts other than those specified in this manual. We are not liable for any damage caused by user’s erroneous use of the printer and inadequate environment.

Data residing in the printer is temporary. Therefore, all data will be lost if power is lost. We are not liable for any damage or loss of profits caused by data loss due to failures, repairs, inspections, etc. Please contact us if there are any mistakes or ambiguities within this manual. If there are missing or incorrectly collated pages in this manual, contact us to obtain a new manual. CITIZEN is a registered trademark of CITIZEN HOLDINGS CO. CITIZEN es una marca registrada de CITIZEN HOLDINGS CO. 2010 by CITIZEN SYSTEMS JAPAN CO.

SAFETY INSTRUCTIONS which must be strictly observed ! To prevent personal injury or property damage, the following shall be strictly observed. The degree of possible injury and damage due to incorrect use or improperly following instructions is described below. This is a mark to call attention to the reader. If not avoided, these may cause damage or trouble to the printer or cause the printer to overheat and release smoke and cause burns or an electrical shock. If the printer is damaged or is malfunctioning, be sure to turn the printer off immediately and remove the power cord from the outlet, then consult our service personnel. Do not jolt or impact to the printer by stepping on, dropping or hitting the printer. Do not place the printer in a poorly ventilated area, or shut off the air vent of the printer.

Do not place the printer where chemical reactions occur, such as in laboratories or where air is mixed with salt or gas. Do not use a power voltage or frequency other than those specified. Do not pull or carry the printer when the tension of the power cord or interface cable is increased. Do not drop or put foreign matter such as clips and pins into the printer. Do not plug the power cord into an outlet with many loads. Do not spill drinks such as tea, coffee and juice on the printer or spray insecticide on the printer. If drink or water is spilled, first be sure to turn the power off and remove the power cord from the outlet, then consult our service personnel.

Do not disassemble or modify the printer. Discard or safely store the plastic packing bag. This bag should be kept away from children. If the bag is pulled over a child’s head, it may cause suffocation. Prior to operation, read the safety instructions carefully and observe them. Be careful when moving or carrying the printer.

Dropping the printer may cause injury or property damage. Make sure if you open the top cover, it is opened all the way. If only partially open, the cover could slam shut, possibly causing injury. When the cover is open, be careful of the corners of the cover. Do not open the printer during printing. When cleaning the surface of the printer case, do not use the cloth that is soaked in thinner, trichloroethylene, benzine, ketone or similar chemicals. Do not use the printer where there is a lot of oil, iron particles, or dust.

eBooks and Guides

Do not spill liquids or spray insecticide on the printer. A careless, rough handling may cause problems or malfunction. Be careful of the edges of the plates so injury or property damage is possible. If a problem occurs during printing, stop the printer immediately and unplug the power cord from the outlet. When printer trouble occurs, do not try to dissemble it. Do not use or store the printer near fire, excessive moisture, in direct sunlight, near an air conditioner or heater or other source of unusually high or low temperature or humidity or excessive dust.

[or]

[/or]
[or]

[/or]

Do not place the printer where chemical reactions occur, such as in a laboratory. Do not place the printer where air is mixed with salt or gas. The printer must sit on a firm, level surface where there is ample ventilation. Never allow the printer’s air vent to be blocked by a wall or other object. Do not put anything on the top of printer. Do not place the printer near a radio or television, and do not use the same wall outlet for the printer and radio or television. Radio or television reception could be adversely affected. Do not put anything on the power cord or step on it.

[or]

[/or]
Neewer ring light

Do not drag or carry the printer with the power cord or interface cable. Avoid plugging the power cord into an outlet with many loads. Do not bundle the power cord when inserting the plug. If it is unavoidable, use the shielded cable or twisted pair for each signal. Place the printer near the outlet where the power cord can be unplugged easily to shut off power. Otherwise, static electricity may be generated and there will be danger of electric shock.

Do not grip the printer by the foam packing material which may break, the adjustable sensors that permit the adjustment of the positions of the media gap or the black mark detection sensor in the media width direction are standard equipment that can detect the position of special media. REPEAT key is pressed, be careful of the corners of the cover. Then set the media width and media thickness adjustment dials. OFF Turning on the power 1. Do not grip the printer by the foam packing material which may break — 2 USB interface This receives USB transmission of data from a host computer.

Setup Confirmation of Carton Contents Removing the Packing Material The printer is shipped with adhesive tape in place to hold the top cover closed. Simply remove the two pieces of tape on either side of the top cover. Then simply open the cover by lifting up and tipping it backwards. There is another strip of adhesive tape that must be removed which holds the mechanism closed for shipping. Remove the tape and attached paper by carefully peeling from the plastic case. Retain the tape should you need to transport the printer again. Check that the following accessories are included with the printer in the carton. The empty carton and packing materials should be stored for future shipping of the printer. Be careful when moving or carrying the printer and when taking the printer out of the carton.

The printer may cause injury or property damage if dropped. Be sure to grip the printer housing firmly when taking it out of the carton. Do not grip the printer by the foam packing material which may break, causing the printer to drop. When opening the cover, open it all the way. If only part way open, the cover could slam shut, possibly causing injury. Be careful of the edge of the cover when the cover is opened. It may cause injury or property damage. Be careful of the edges of the metal plates so injury or property damage is possible.

Is opened vertically to place or replace media. It allows warm air to vent from the printer. Be sure not to block it with media etc. The amount of media remaining can be checked through this window. The media is supported by the media holder bar when installed in the printer. This guide is moved horizontally to match the media size. The guide can be sliding it from the holder bar.

It discharges the heat of the media feed motor. Do not cover it with media etc. It is removed to install optional units such as the peeler or cutter. It is adjusted to match the width of the media. It is adjusted to match the thickness of the media. The head unit can be raised to install media by pushing this lever. It locks the head unit during printing. Avoid touching this with your fingertips and leaving grease or dirt on the printhead surface. Interlocked with the thermal printhead, it feeds media backwards or forwards. When used as a reflective sensor, it is used by matching the sensor marking on the bottom sensor with the position of the black mark on the liner or media backing.

The media can be installed by raising this arm. The media can be held in place by lowering this arm. The end of the media is matched to the left fixed media guide, then the right side movable media guide is moved horizontally to match it to the media size. It is opened when the cables of the cutter unit and the peeler unit are connected. Do not remove during normal use. This is lit when the printer power is on.

This is lit when the printer is able to print. This is on when selecting settings. This key feeds the media to the top of the next label or form. This stops printing or cancels the alarm. This receives serial transmission of data from a host computer. This receives USB transmission of data from a host computer. The is the power switch for the printer. The connector of the enclosed power cord is connected here. Check that the power switch to the printer is turned OFF. Connect the connector of the power cord to the power cord inlet on the printer. Insert the plug of the power cord in the AC outlet. Use an AC outlet that accepts a three-pronged plug.

Driver Installation The computer may automatically detect the presence of the new printer when it is first started, depending on the computer type, interface and operating system. Follow any on-screen instruction and also instructions supplied with any additional CD-ROM or floppy disk included with your printer. Your supplier will assist you with the correct drivers and software which are compatible with your particular computer system. An optional internal Ethernet, an IEEE1284 Parallel or Wireless LAN port can be added by your dealer. With the exception of a wireless LAN connection, an interface cable is necessary to connect the printer to a computer. Turn OFF both power switches of the printer and the computer. Connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws, where available. Connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws, where available. OFF Turning on the power 1.